Osd / Display Menu - Barco F70 Service Manual

7

OSD / display menu

To enter the menu, press the menu key on either the projector keypad or remote control. The main menu,
shown below, will then appear on the screen and the display.
If another menu appears, press the "back" key (Remote Control) or the arrow key ( <–) on the keypad, until
this menu appears. Then use the arrow keys and the confirm key to navigate in the menu. The different
choices in the menu are mainly self-explanatory, and open for all users. The exception is the service menu,
where more specific adjustments and settings, and also the status of the projector are available.
Image 7-1
723–0018 /02 F70 41