GE PACSystems RXi-XP IPC Hardware Reference Manual page 7

Welcome
This document defines the RXi Box Industrial PC-XP composed of a bCOM6 COM Express module and the
CEC02 or CEC04 Carrier board.
A Computer-On-Module, or COM, is a module with all components necessary for a bootable host computer,
packaged as a super component. A COM requires a Carrier Board to connect I/O and to power up. COMs are
used to build modular solutions and offer OEMs fast time-to-market with reduced development cost. Like
integrated circuits, they provide OEMs with significant freedom in meeting form-fit-function requirements. For
all these reasons the COM methodology has gained much popularity with OEMs in the embedded industry.
The CEC02/CEC04 Carrier boards are based on the PICMG COM Express Module Base Specification.
The RXi Box IPC-XP is based on industrial grade housing for the Module and Carrier components.
Chapter 1 is the introduction
Chapter 2 describes unpacking and inspection
Chapter 3 is about the installation
Chapter 4 lists the resources
Chapter 5 defines the specifications
Chapter 6 describes the hardware
Chapter 7 informs about support, service and warranty
The following documents also cover items relevant to the RXi Box IPC-XP:
•
User's Manual for AMIBIOS8 Setup
• AMIBIOS8 Check Point and Beep Code List
• AMIBIOS8 Error Messages
PACSystems RXi Box IPC-XP Hardware Reference Manual
Internal
GFK-2990 7