Installation Preparation; General Advice - GE PACSystems RXi-XP IPC Hardware Reference Manual

3.2 Installation preparation

Use the following steps to install your GE Intelligent Platforms hardware:
Danger to life through electric shock!
Before installing or removing any board, please ensure that the system power and
external supplies have been turned off.
• Check that the jumpers, if any, are correctly configured for your application.
•
Mount the RXi Box IPC-XP very carefully. See also additional advisories below.
• Connect all IO cables.
• Once you are certain that all modules are correctly fitted into the system and all connections have been
made properly, restore the power.

3.3 General advice

Please observe all safety procedures to avoid damaging system and protect operators and users.
Danger to life through electric shock!
Before installing or removing any board, please ensure that the system power and
external supplies have been turned off.
PACSystems RXi Box IPC-XP Hardware Reference Manual
Internal
WARNING
WARNING
GFK-2990 29