Updating Internal Firmware / History Menu P - Pentair SPEEDEO SB-PF-SPO-003C Installation And User Manual

How to update the internal rmware
USB
recognised
2.1
SPEEDEO
®
VA R I A B L E S P E E D P U M P
ESC VALID
Home menu > Update menu :
Firmware update
Insert the USB stick and
hold down the
Up key
SPEEDEO
®
VA R I A B L E S P E E D P U M P
4.3
ESC VALID
4.4
SPEEDEO
®
VA R I A B L E S P E E D P U M P
ESC VALID
5.2
History menu
This menu makes it possible to find the daily and previous day's activity of each connected piece of equipment.
1 - Access the secured DAILY HISTORY menu by holding down Esc :
01:22 Water:+26.6°C
Filtration : S3
S1:OFF S2:ON S3/OFF
Air:+26.8°C
1.1 - Unzip the MAJ_Speedeo2.zip file to obtain the Speedeo2.bin file.
1.2 - Copy the Speedeo2.bin file to the main folder of the USB stick
formatted in FAT 16 or FAT 32.
2.1 - Remove the soft cover, then remove the orange cover
!! DO NOT TOUCH THE ELECTRICAL CONNECTIONS. RISK OF ELECTROCUTION!
ONLY PROFESSIONALS AUTHORISED TO WORK WITH LIVE INSTALLATIONS MAY
WORK ON THE CONNECTED DEVICE WITHOUT A SAFETY COVER.
3.1 - Select the update menu
4.1 - Connect the USB cable supplied to the mini USB connector.
4.2 - Connect the USB stick to the end of the USB cable
4.3 - Press on the "up arrow / +" for more than 1 sec.
4.1
4.4 - The red and green indicators light up.
4.5 - Wait for the green indicator to remain off for 5 sec.
4.2
5.1 - Disconnect the USB stick (the green indicator lights up)
5.2 - In the main menu at the bottom, under Information, read the
version no.: X.X and check that it has changed.
5.3 - Replace the orange safety cover
5.4: Replace the soft cover.
DAY IN P R OG R ESS
Filtration : 0 8 h 4 7 m0 6 s
ESC
O utl e t 1 : 0 5 h 0 7 m2 0 s
O utl e t 2 : 0 2 h 3 4 m0 9 s
O utl e t 3 : 0 0 h 5 1 m4 3 s
DAY-1 HISTORY
Filtration: 15h06m57s Outlet 1 :
ESC
07h11m20s
Outlet 2 : 03h16m54s
Outlet 3 : 01h24m05s
27