History Values - Pentair AUTOTROL 604 Installer Manual

6.8.

History values

The controller features a review level that displays the operation history of the system. To access
history values :
A Press and hold
→ To view the "H" levels.
B Press to navigate through the table.
→ When the desired code is reached, press
value.
→ Some of the values have four digits. Press
first two digits, then press
A
Note
When is pressed to view H2 history, the current flow rate will be displayed but not
updated. Continue to press and release
dot on the display will flash when there is flow through the turbine.
A
Note
After 30 seconds without a button press, the controller exists the history table.
Code
H1 Days since last recharge
H2 Current flow rate
H3 Current day of week
H4 Water used today since 02h00
A0 Average water usage for day 0
A1 Average water usage for day 1
A2 Average water usage for day 2
A3 Average water usage for day 3
A4 Average water usage for day 4
A5 Average water usage for day 5
A6 Average water usage for day 6
Ref. MKT-IM-007 / A - 16.12.2016
and simultaneously for 3 seconds.
to display the last two digits.
Description
Installer Manual Autotrol 368 / 604-606 - Programming
to display the
to display the
every 5 seconds to update the display. The flow
Notes
Days since last recharge
Liter per minute
Current day of week
In liters,
max value displayed 9999
max value stored 65 535
31 / 54