Washing Assisted By 6-Way Valve P - Pentair SPEEDEO SB-PF-SPO-003C Installation And User Manual

Assisted backwash: Backwash support for the lter on the 6-way valve.
SPEEDEO supports you in washing the filter by chronologically proposing the different required
steps.
Welcome menu > Filter Washing:
- M a n u a l B ac k was h
Fi l trat i on : 1 0 0 h r s
b a ck wa s h : 70 s
R i n s i n g : 2 0 s
Filtration menu > Filter Washing > Manual backwash: VALID
!! !! !! !! !! !! !! !! !! !!
! ' Va l i d ' to !
! s t a r t wa s h i n g !
!! !! !! !! !! !! !! !! !! !!
VALID
!!!!!!!!!!!!!!!!!!!!!
!Put into position !
! backwash +'Valid.'!
!!!!!!!!!!!!!!!!!!!!!
!! !! !! !! !! !! !! !! !! !!
! Wa s h i n g i n !
! p rogres s 7 s ec s !
!! !! !! !! !! !! !! !! !! !!
! !! !! !! !! !! !! !! !! !! !
! Sto p !
! l t rati o n !
! !! !! !! !! !! !! !! !! !! !
!! !! !! !! !! !! !! !! !! !!
!Pu t i nto pos i t i o n !
! R in s i n g + ' Va l i d.' !
!! !! !! !! !! !! !! !! !! !!
VALID
!! !! !! !! !! !! !! !! !! !!
! R in s i n g i n !
! p ro gre s s 1 7 s e c s !
!! !! !! !! !! !! !! !! !! !!
! !! !! !! !! !! !! !! !! !! !
! Sto p !
! l trat i on !
! !! !! !! !! !! !! !! !! !! !
!! !! !! !! !! !! !! !! !! !!
!Pu t i nto pos i t i o n !
!Fi l trati o n + Va l i d !
!! !! !! !! !! !! !! !! !! !!
VALID
24
1 - On the Filter washing sub-menu, enter the filtration length (factory pre-set at 100
hours), which activates the alert requesting filter washing, the desired washing time
length (factory pre-set at 70 secs) and enter the desired filter rinsing time length
(factory pre-set at 20 secs). These time lengths can be personalised by following the
recommendations for your installation.
Press VALID to start the procedure.
Put the 6-way valve in the 'Rinsing' position and then hold down VALID.
SPEEDEO starts the filtration pump for the length of time entered into the
Washing: XX secs.
SPEEDEO has stopped the filtration pump. This display lasts for 2 seconds.
Put the 6-way valve in the 'Rinsing' position and then hold down VALID.
SPEEDEO starts the filtration pump for the length of time entered into the
Rinsing field: XX secs.
SPEEDEO has stopped the filtration pump. This display lasts for 2 seconds.
Put the 6-way valve in the 'Filtration' position and then hold down VALID.
The procedure is finished.