The Codesys Controller Cpx−Cec/Cpx−Cec; System Summary - Festo CPX-CEC Electronic Manual

1. System summary

1.1 The CoDeSys controller CPX−CEC/CPX−CEC−...
Festo P.BE−CPX−CEC−EN en 1004a
The controller is available in the following variants:
Variant
CPX−CEC−C1
CPX−CEC−M1
CPX−CEC
Tab. 1/1: Variants of the CoDeSys controller
All variants offer...
Programming with CoDeSys provided by Festo as per
IEC 61131−3
Programming and communication via Ethernet
Process visualisation within CoDeSys provided by Festo,
with a type FED operator unit or with the software VipWin
via Ethernet
Additional process visualisation systems can be con
nected via the supplied OPC server if they have an OPC
client.
The CoDeSys controller controls a CPX terminal in the
Stand Alone or Remote Controller operating mode.
Communication over fieldbus in connection with the use
of the respective fieldbus node in the CPX terminal
Control configuration of CoDeSys provided by Festo for
commissioning, programming and diagnosis of the
system
Connection of a handheld of type CPX−MMI. The handheld
is used to display status and diagnostic information and
for fast commissioning of the CPX modules in the CPX
terminal.
Characteristics
CoDeSys controller with CANopen interface
CoDeSys controller with CANopen interface
and function library for SoftMotion
CoDeSys controller with RS232 interface
1−3