Supported Motor Controllers - Festo CPX-CEC Electronic Manual

1. System summary
1.2

Supported motor controllers

Festo P.BE−CPX−CEC−EN en 1004a
The CoDeSys controllers CPX−CEC−C1/−M1 as CANopen
masters support all motor controllers from Festo.
CPX−CEC−M1 with SoftMotion functions supports the
following motor controllers:
Motor controller
CMMP−AS
CMMS−AS
CMMS−ST
SFC−LAC
SFC−LACI
CMMD
1) See rating plate for FCT plug−in of the motor controller
Tab. 1/2: Supported motor controllers with CPX−CEC−M1
(date: June 2010)
CPX−CEC−C1/−M1 support up to 31 axes. We recommend
operating the CPX−CEC−M1 with a maximum of eight axes.
1
Required firmware
3.5.1501.2.1
1.3.0.1.11
1.3.0.1.7
(the versions 1.3.0.1.10 and 1.3.0.1.12 are
not supported)
1.0.5
1.0
1.4
from Version...
1−5