Temperature Controller - Graco Advanjet Diaphragm-Jet HV-2000 Setup And Operation

3.2

Temperature Controller

The HV-2000C Temperature Controller regulates the
temperature of the dispensing fluid and displays the
present and set point temperatures.
The main menu displays the present temperature
value (PV) in red on the top line of the display and the
set point temperature value (SV) in green on the
bottom line of the display.
Use the (INDEX) key to cycle through the menu options on the PV line,
the  keys to scroll though settings or increase or decrease temperature values,
and the (ENTER) key to save an input and exit the menu.
SET POINT TEMPERATURE
To turn ON the heater:
 Press
 Use the  keys to select the rUn setting to turn ON the heater.
 Press the
 Press the
Page 14 of 60
―ENTER‖ KEY
Figure 3-6: Present Value (PV) , Set Value (SV),
ENTER Key and INDEX Key
until the Run-Stop Output Control screen (r-S) is on the PV line.
key to save the change. Now the heater is turned ON.
key again to return to the main screen display.
Figure 3-7: Turn ON the Heater
Advanjet HV-2000C Jet Controller Setup and Operation
Figure 3-5:
Temperature Controller
PRESENT TEMPERATURE
―INDEX‖ KEY
3A5856A