Safety Guidelines - Graco Advanjet Diaphragm-Jet HV-2000 Setup And Operation

Safety Guidelines

Hazards may arise if handled improperly by unqualified personnel. It is recommended
that operating personnel thoroughly review these operating instructions.
The following warnings are for the setup, use, grounding, maintenance, and repair of
this equipment. The exclamation point symbol alerts you to a general warning and the
hazard symbols refer to procedure-specific risks. When these symbols appear in the
body of this manual or on warning labels, refer back to these Warnings. Product-specific
hazard symbols and warnings not covered in this section may appear throughout the
body of this manual where applicable.
ELECTRIC SHOCK HAZARD
This equipment must be
cause electric shock.
•
Turn off and disconnect power cord before servicing equipment.
•
Connect only to grounded electrical outlets.
•
Use only 3-wire extension cords.
•
Ensure ground prongs are intact on power and extension cords.
•
There are no user-serviceable components under the cover. Disconnect the power cord
and contact Advanjet if there is any desire to remove the cover.
TOXIC FLUID OR FUMES HAZARD
Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin,
inhaled, or swallowed.
•
Read Safety Data Sheets (SDSs) to know the specific hazards of the fluids you are
using.
•
Store hazardous fluid in approved containers, and dispose of it according to applicable
guidelines.
PERSONAL PROTECTIVE EQUIPMENT
Wear appropriate protective equipment when in the work area to help prevent serious injury,
including eye injury, hearing loss, inhalation of toxic fumes, and burns. Protective equipment
includes but is not limited to:
•
Protective eyewear, and hearing protection.
•
Respirators, protective clothing, and gloves as recommended by the fluid and solvent
manufacturer.
3A5856A
WARNING
grounded.
Advanjet HV-2000C Jet Controller Setup and Operation
Improper grounding, setup, or usage of the system can
Page 5 of 60