Using The Hv-2000C Controller Front Panel; Jet And Fluid Pressure Regulators - Graco Advanjet Diaphragm-Jet HV-2000 Setup And Operation

3. Using the HV-2000C Controller Front Panel

TRIGGER
BUTTON
JET
PRESSURE
GAUGE
RS-232
PORT
JET PRESSURE
CONTROLLER
3.1

Jet and Fluid Pressure Regulators

The HV-2000C controller has two integrated air
regulators (see Figure 3-2) that control the pressure to
the Jet and the Fluid supply. Turn the knob clockwise to
increase and counterclockwise to decrease. Digital
gauges indicate the pressure levels; the Jet Pressure
gauge is pictured below. The default pressure unit on
the HV-2000C is psi
from the pressure regulator manufacturer are in
Appendix 3: Digital Pressure Gauge.
Figure 3-3:
Jet Pressure Gauge
3A5856A
TRIGGER LED
TEMPERATURE
CONTROLLER
Figure 3-1: HV-2000C Front Panel
(1 psi = 0.00689 MPa). Details
The Air Switch allows the operator
to instantly turn the Fluid Pressure
ON or OFF.
convenient when changing fluid or
cleaning the jet.
Advanjet HV-2000C Jet Controller Setup and Operation
KEYPAD LCD DISPLAY
FLUID PRESSURE
CONTROLLER
This is
POWER
SWITCH
FLUID
PRESSURE
GAUGE
AIR
SWITCH
Figure 3-2:
Pressure Regulators and
Air Swicth
very
Figure 3-4:
Air Switch
Page 13 of 60