7.4
Jetting Commands (Continued)
SV
Set Jet Value State
This command allows the host to open or close the Jet valve.
1
# nValveID
2
# nValveStatus
Example:
SV 0,1; opens the Jet.
SD
Reset Internal Drop Counter to 0
This command is used to reset the internal drop counter to zero
#nDropcnt
Resets the internal drop counter.
Example:
SD 0; resets the internal drop counter to 0.
Page 36 of 60
Sets # nValveID to 0 for Jet valve
Sets # nValveStatus; 1 = open and 0 = closed
Advanjet HV-2000C Jet Controller Setup and Operation
# nValveID,# nValveStatus;
#nDropcnt;
3A5856A