Table of Contents
Advertisement
Installation
Mount the Controller
To reduce the risk of fire or explosion, do not install
equipment approved only for a non-hazardous
location in a hazardous location.
NOTE: Install the air controller in a non-hazardous
location only.
The air controller can be mounted on the control box
stand or wall mounted. The box comes with four
mounting brackets installed in a vertical orientation.
Remove and turn the brackets if a horizontal
orientation works better for your installation.
3A3954B
Wall Mounting
The pre-installed mounting brackets can be used to
mount the controller on any flat wall. Mount the Air
Controller in the non-hazardous area, as close to
the applicator as possible to minimize pressure loss
in the air lines.
1. Determine the mounting location. Ensure that
the wall is strong enough to support the weight
of the mounting bracket and the controller. See
Technical Specifications, page
2. See the Dimensions or use the box as a template
to mark the mounting hole locations.
3. Drill holes and use four screws to attach the
controller to the wall.
Electronic Air Controller
Installation
41.
9
Advertisement
Table of Contents
