Advantech B+B SmartWorx IMcV-Giga-FiberLinX-III User Manual page 30

(OPERATION AND ADMINISTRATION MANAGEMENT) OAM
Two modes of operations control the OAM function:Passive and Active. Passive
mode is the default mode. OAM Enable is defaulted to Enable.
OAM AH passive/active is available on the fiber SFP ports and TX ports.
• Supports Discovery functions on the SFP ports.
• Supports reporting OAM Flag Events (Link Fault, Critical Event, Dying Gasp)
• Supports Loopback
VIEWING SFP STATISTICS (SFPSTATS)
To view SFP statistics on the iMcV-Giga-FiberLinX-III, enter sfpstats. This will
open a screen displaying SFP information, including vendor, serial number, bit
rate and other options.
Pressing the Space Bar will refresh the data on the screen.
iMcV-Giga-FiberLinX-III
30