Advantech B+B SmartWorx IMcV-Giga-FiberLinX-III User Manual page 20

The TFTP server should be open. Press Enter to start downloading the file.
After the transfer process is complete, press Enter to load the configuration file:
Once loaded into the device's SNMP memory area, the system prompts the user to
reboot the device to make the new configuration active.
ACCOUNTS
Following are the three levels for CLI or Telnet account access:
User
Operator
Administrator
View status, change own password, and reboot.
All User privileges mentioned above, plus ability to change settings.
Operator privileges mentioned above, plus ability to
add/delete accounts and reinitialize the unit to default
settings (cleandb).
20
iMcV-Giga-FiberLinX-III