Label Setting - ISHIDA UNI-7 Service Manual

Chapter 7 SETUP MODE
7.3

LABEL SETTING

1.
Press the "LABEL" field on the setup menu screen.
2.
The label setup screen appears.
Press to select a desired field for each item.
PRINTER
LABEL NO.
THERMAL PAPER TYPE
LABEL GAP
BACK FEED
SENSOR TYPE
SENSOR DISTANCE
PRINT DIRECTION
PREPRINT FEED
PRINT SPEED
PRINT DENSITY
FORMAT NO.
ITEM NO.
7-10
Select a desired printer.
Enter a numeric value and press this field.
Select one of the following types:
0: Receipt
1: 130LA-A
3: 150LA-1
Enter a numeric value and press this field.
Press to select either "NO" or "YES".
Select one of the following types:
0: No use
1: Label
Enter a numeric value and press this field.
Press to select either "NORMAL" or "REVERSE".
Enter a numeric value and press this field.
Select one of the following print speeds:
1: 80mm/sec
2: 100mm/sec
Select a desired print density level (0 – 9).
Enter a numeric value and press this field.
Enter a numeric value and press this field.
UNI-7 Service Manual