Operation Panel - ISHIDA UNI-7 Service Manual

5.6.3 OPERATION PANEL

Raise the operation panel and remove the
1.
four fixing screws.
Front cover
Raise the operation panel and remove the two upper screws and loosen the two lower screws.
3.
Unplug the keyboard harness from the main board and remove the screw for the cable clamp.
4.
Remove the operation panel from the main unit.
5.
* Reverse this procedure for assembly.
UNI-7 Service Manual
Operation panel
Chapter 5 MACHINE DISASSEMBLY
Remove the front cover of the main unit.
2.
5-31