5.1.6
LABEL SENSOR
Pull out the cassette unit from the main unit.
1.
This photo shows the location of the label
3.
sensor receiver.
Carefully remove the two screws fixing the
5.
label sensor unit so as not to drop or lose the
inserted collars.
This photo shows the breakdown of the
7.
sensor unit.
* Reverse this procedure for assembly.
UNI-7 Service Manual
Chapter 5 MACHINE DISASSEMBLY
Open the printer lid.
2.
Lower the thermal head unit by pushing down
4.
the lever.
Label sensor
(Receiver)
Unplug the harness.
6.
Remove the screw fixing the bracket.
8.
Thermal head unit
Printer lid
5-7