Operation Panel Unit (For Single Printer) - ISHIDA UNI-7 Service Manual

Chapter 5 OVERVIEW

5.5.2 OPERATION PANEL UNIT (FOR SINGLE PRINTER)

Remove the two screws located on the
1.
bottom of the operation panel unit.
R emove the screw located on the bottom of
3.
the operation panel unit.
Operation panel
Remove the two screws fixing the roll
5.
holder.
Remove the screw fixing the operation
7.
panel.
5-24
Remove the two screws located at the
2.
customer display side.
, peel off the blind plate.
4.
Pull out the holder.
6.
Detach the operation panel.
8.
UNI-7 Service Manual