ISHIDA UNI-7 Service Manual page 172

Chapter 9 ERROR SCREENS
ERROR ID NOS. 312 – 396
ID NO.
312-
LABEL IS REMAINING
000
312-
LABEL IS REMAINING
001
313 PRINTER THERAML HEAD IS UP
MARK DOWN PRICE IS MORE THAN
316
ORIGINAL PRICE
VARIOUS PRICE IS LOWER THAN
317
ORIGINAL PRICE
MARK DOWN UNIT PRICE IS LESS
318
THAN ORIGINAL PRICE.
PRODUCTION FOR TARGET IS
319
COMPLETED
321 PRICE IS NOT PROGRAMMED
LOWER VALUE IS LESS THAN FIXED
339
WEIGHT
342 POS CODE IS NOT PROGRAMMED
343 POS CODE IS NOT PROGRAMMED
347-
THERMAL HEAD IS WORN OUT
000
347-
THERMAL HEAD IS WORN OUT
001
347-
THERMAL HEAD IS WORN OUT
002
351 LABEL IS REMAINING
356 THERE IS NO CF CARD
357 THERE IS NO DICTIONARY FILE
361 POWER IS ON
396 NO USB MOMORY
9-4
TITLE TEXT
* LABEL IS REMAINING.
REMOVE LABEL
REMOVE LABEL ON APPLICATOR.
* THERMAL HEAD IS UP.
SET THERMAL HEAD
CHECK PRICE.
NORMAL PRICE[* $] MARK DOWN PRICE[* $]
CHECK PRICE.
NORMAL PRICE[* $] VARIOUS PRICE[* $]
CHECK UNIT PRICE.
NORMAL UNIT/PRICE[* $] MARK DOWN UNIT
PRICE[* $]
CHECK TARGET No.
CLEARS TARGET No.
ENTER PRICE
IF YOU CHANGE FIXED WEIGHT [* g] TO [* g]
POS CODE IS NOT PROGRAMMED
AFTER PROGRAMMING IT
POS CODE IS NOT PROGRAMMED.
BARCODE CAN NOT BE PRINTED.
IT WORNS OUT WHERE IT DOES NOT EFFECT
ON PRINTING.
NO PROBLEM ON PRICING LABEL.
DO YOU WANT TO CHECK?
PRESS (EXEC) TO CHECK.
DOES NOT CHECK (STOP).
IT IS WORN OUT SIDE OF FORMAT
YOU NEED TO CHANGE THERAMAL HEAD.
DO YOU WANT TO CHECK?
START CHECKING WITH (EXEC).
(STOP) DO NOT CHECK
IT IS NOT PRITNING BARCODE CORRECTLY.
CHANGE THERMAL HEAD.
YOU CAN NOT DO THE WORK.
REMOVE LABEL
CHECK CF CARD.
CHECK CF CARD.
CHECK SCALE FOR STARTING PRODUCTION.
CHECK USB MEMORY
UNI-7 Service Manual