Elevated Type; Operation Panel Unit (For Dual Printer) - ISHIDA UNI-7 Service Manual

Chapter 5 OVERVIEW
5.5

ELEVATED TYPE

5.5.1 OPERATION PANEL UNIT (FOR DUAL PRINTER)

Remove the two screws located on the
1.
bottom of the operation panel unit.
R emove the screw located on the bottom of
3.
the operation panel unit.
Operation panel
5-22
Remove the two screws located at the
2.
customer display side.
Slide the roll holder release lever in the
4.
arrow direction.
UNI-7 Service Manual