Front & Rear Stainless-Steel Housings - ISHIDA UNI-7 Service Manual

Chapter 5 MACHINE DISASSEMBLY
5.6.4 FRONT & REAR STAINLESS-STEEL HOUSINGS
This photo shows the front and rear stainless housings.
1.
Rear housing
Make sure that the operation panel is removed. (Refer to section 5.6.3)
2.
Remove the cassette unit from the main unit
3.
and also remove the printer cover.
5-32
Front housing
Front cover
Printer cover
Remove the printer frame.
4.
Printer frame
UNI-7 Service Manual