Wiring Option; Cable/Connector Sets - Mitsubishi Electric HG-KN Instruction Manual

5. WIRING OPTION

5. WIRING OPTION
WARNING
CAUTION

5.1 Cable/connector sets

Please purchase the cable and connector options indicated in this section for the servo motor.
Before connecting options, turn off the power and wait for 15 minutes or more
until the charge lamp turns off. Otherwise, an electric shock may occur. In
addition, when confirming whether the charge lamp is off or not, always confirm it
from the front of the servo amplifier.
Use specified options. Otherwise, it may cause a malfunction or fire.
POINT
The IP rating indicated for cables and connectors is their protection against
ingress of dust and raindrops when they are connected to a servo motor. If the
IP rating of the cable, connector, and servo motor vary, the overall IP rating
depends on the lowest IP rating of all components.
5 - 1