Setpoints - Carrier VVT Zone Installation And Startup Manual

Point Name/Description
Local Sensor Calibration
Space Temperature – The current space temperature.
Space Temp Calibration
temperature sensor to be adjusted to match a calibrated standard measuring the
temperature in the same location.
Supply Air Temperature – The current supply air temperature.
Supply Air Temp Calibration
temperature sensor to be adjusted to match a calibrated standard measuring the
temperature in the same location.
Space Relative Humidity –
present.
Relative Humidity Calibration – You can enter a calibration offset for the relative
humidity. The offset is added to or subtracted from the controller's RH input value, and
the calculated value is shown in the Status > Space Relative Humidity

Setpoints

Navigation:
i-Vu / Field Assistant:
BACview:
Select a color band on the setpoint graph to see the current setpoints in the Heating and Cooling fields. See setpoint
descriptions below.
VVT Zone Controller
– A calibration offset value to allow the local space
– A calibration offset value to allow the supply air
Displays the current value of relative humidity sensor, if
Properties
HOME
>
.
Equipment Configuration
> >
CONFIG SETPOINT
>
Default/Range
R: -56 to 245°F
D: 0°F
R: -9.9 to 10°F
R: -56 to 245°F
D: 0°F
R: -9.9 to 10°F
R: 0 to 100%
D: 0%
R: -15 to 15%rh
Setpoints
>
53