Troubleshooting; Maintenance Diagnostics; How To Begin Maintenance Diagnostics - MUTOH ValueCut VC-600 Maintenance Manual

MAINTENANCE MANUAL

Troubleshooting

Maintenance Diagnostics

This section provides maintenance diagnostics as troubleshooting aids. This diagnostic feature is to
check hardware to find out which components are good or defective. Using this diagnostic test facility
enables the diagnosing of the hardware components.

How to Begin Maintenance Diagnostics

To start the Maintenance Diagnostics facility hold down the On/Off Line button and CUT TEST
button while turning on the cutter. The following sub-sections will explain the function of each
maintenance diagnostic sequence.
VCE-MM-02
43