Adjusting The X Motor Tension Belt - MUTOH ValueCut VC-600 Maintenance Manual

Adjusting the X Motor Tension Belt

3. Tighten the 4 retaining screws
to lock the bracket in place.
Note: The belt connecting the drum and X motor needs to be tightened to a tension of 4 kg.
VCE-MM-02
1. Loosen the 4 retaining screws
locking the X-motor bracket in
place.
2. Place the push-pull tension
gauge's hook-arm at the hole
of X motor bracket and pull
the motor toward yourself
along the direction parallel to
the racket edge, and keep it at
the 4kg tension position.
4. Fix the tension retaining screw.
40
MAINTENANCE MANUAL