Enter Back Up Values - MUTOH ValueCut VC-600 Maintenance Manual

Enter Back up values

Requires restore when updating the firmware and restore will initialize all the settings. Only "AAS
Offset X/Y", "Scale Length/Width" values can be backed-up even performing restore.
Press "TOOL SELECT" key and enter to tool setting menu.
" key twice and display the restore menu.
Press "
}
Press "CUT TEST" key and "ON/OFF LINE" key at the same time.
Press "ENTER" key.
VCE-MM-02
Offline For
System Setup
1S 72 F
Select:{}
Restore default ?
Select:{}
x2
BackUp Setting
N:ONLINE
Sure to Backup
N:ONLINE
33
MAINTENANCE MANUAL
80 O0.250M
Ok:ENTER
Ok:ENTER
Ok:ENTER
Ok:ENTER