Introduction; Note To Installer - ELECTRO FREEZE 876 Operator's Manual

ELECTRO FREEZE
1

Introduction

Models 876, 876C, 876RH and 876CRH
are specifically designed to dispense
a high quality, smooth-frozen, noncar-
bonated, water and sugar based drink
that is served in a variety of flavors. The
product can be a neutral base or a pre-
mixed flavor. Models 876B and 876BRH
are designed to dispense a variety of
smooth-frozen alcoholic drinks with less
than 8% alcohol.
NOTE: Models 876RH, 876BRH, and
876CRH, with refrigerated hopper, are
required when drinks containing per-
ishable products are to be dispensed.
This manual has been prepared to assist
you in the proper operation and general
maintenance of the Electro Freeze Model
876, 876B, 876C, 876RH, 876BRH and
876CRH freezers.
The freezer will not compensate for, or
correct, any assembly or priming errors
made during the initial start-up. Therefore,
it is important that you follow the assem-
bly and priming procedures detailed in
this manual.
2

Note to Installer

This freezer must be installed and serviced by an Electro Freeze Distributor or
authorized service technician in accordance with the installation instructions.
After installation the warranty registration card must be completed and
returned to validate the warranty.
184633
Models 876, 876B, 876C, 876RH, 876BRH, 876CRH & 875 Batch
Be sure all personnel responsible for
equipment operation completely read and
understand this manual before operating
the freezer. When properly operated and
maintained, this freezer will produce a
consistent quality product.
If you require technical assistance, please
contact your local authorized Electro
Freeze Distributor, as follows:
Name __________________________
Address: ________________________
_________________________
Phone: _________________________
For factory service assistance — contact
H. C. Duke & Son, LLC., Electro Freeze
Service Department as follows:

Phone: (309) 755-4553
(800) 755-4545
FAX: (309) 755-9858
E-mail: service@hcduke.com
1