Initializing The Piece Counter - DURKOPP ADLER 581 Operating Instructions Manual

Programming
Operating Instructions 581 - 02.0 - 05/2019
5.2.7

Initializing the piece counter

The machine is equipped with a piece counter that counts the
number of sewn buttonholes. After the  symbol (1) the current
value (e.g. 2) is displayed. The piece counter value is retained
after the machine is switched off.
The piece counter counts up to a maximum of 9999 buttonholes.
When this value is exceeded, the count starts again at 0.
Fig. 51: Initializing the piece counter
(1) - Piece counter field
To reset the piece counter:
1. Use the button to navigate to the field Piece counter (1).
2. Press the
 The menu bar changes.
3. Hold the button for approx. 2 seconds.
 The piece counter is set to 0 and the display changes back
to the main menu ( p. 65).
button.
①
71