DURKOPP ADLER 581 Operating Instructions Manual page 40

38
7. Thread the gimp thread through the hole (8) and insert it
into the loop of the threading wire (4).
8. Pull the threading wire (4) with the gimp thread through
guide (7).
OR
Use compressed air to blow the gimp thread through guide (7).
Fig. 22: Threading the gimp thread (3)
⑨
⑤
⑩
⑪
(5) - Guide
(9) - Plate
(10) - Pin
9. Turn the sewing mechanism manually by 180°.
10. Feed the gimp thread from guide (5) past the pin (10) on
the outside.
11. Feed the gimp thread through guide (11) from the front.
12. Feed the gimp thread behind the plate (9) from bottom to top.
13. Feed the gimp thread through guide (12) from the front.
14. Feed the gimp thread through the hole (13).
(11) - Guide
(12) - Guide
(13) - Hole
Operating Instructions 581 - 02.0 - 05/2019
Operation
⑬
⑫