DURKOPP ADLER 581 Operating Instructions Manual page 184

Error Meaning
8251 Fault during ADSP booting
– or booting
8258
9000 Seam appearance fault
–
9004
9009 Cutting punch is not in
position
182
Possible cause
• Internal error
• Disturbance
• Internal error
• Cutting position sensor • Check the plug and
Operating Instructions 581 - 02.0 - 05/2019
Troubleshooting
Remedial action
• Switch off and on
the machine
• Perform a software
update
• Contact customer
service
• Switch off and on
the machine
• Perform a software
update
• Reset data ( p. 130)
• Contact customer
service
cable and replace, if
required
• Replace the distributor
board