Safety; Basic Safety Instructions - DURKOPP ADLER 581 Operating Instructions Manual

Safety

Transport Use a lifting carriage or stacker to transport the machine.
Setup The connection cable must have a power plug approved in
Obligations
of the operator
Operating Instructions 581 - 02.0 - 05/2019
2 Safety
This chapter contains basic information for your safety. Read
the instructions carefully before setting up or operating the
machine. Make sure to follow the information included in the safety
instructions. Failure to do so can result in serious injury and
property damage.
2.1

Basic safety instructions

The machine may only be used as described in these instructions.
The instructions should be available at the machine's location
at all times.
Work on live components and equipment is prohibited.
Exceptions are defined in the DIN VDE 0105.
For the following work, switch off the machine at the main switch
or disconnect the power plug:
• Replacing the needle or other sewing tools
• Leaving the workstation
• Performing maintenance work and repairs
• Threading
Missing or faulty parts could impair safety and damage the
machine. Only use original parts from the manufacturer.
Raise the machine max. 20 mm and secure it to prevent it from
slipping off.
the relevant country. The power plug may only be assembled to
the connection cable by qualified specialists.
Follow the country-specific safety and accident prevention
regulations and the legal regulations concerning industrial safety
and the protection of the environment.
9