Maintenance - DURKOPP ADLER 581 Operating Instructions Manual

Maintenance

Operating Instructions 581 - 02.0 - 05/2019
6 Maintenance
WARNING
Risk of injury from sharp parts!
Punctures and cutting possible.
Prior to any maintenance work, switch off
the machine or set the machine to threading
mode.
WARNING
Risk of injury from moving parts!
Crushing possible.
Prior to any maintenance work, switch off
the machine or set the machine to threading
mode.
This chapter describes maintenance work that needs to be carried
out on a regular basis to extend the service life of the machine
and achieve the desired seam quality.
Advanced maintenance work may only be carried out by qualified
specialists ( Service Instructions).
Maintenance intervals
Work to be carried out
Machine
Remove thread residues
Remove any sewing dust in the area below
the throat plate
Check the oil level
Check and clean the toothed belt
Lubricate the cutting punch
Operating hours
8 40 160 500





131