Zz Offset - DURKOPP ADLER 581 Operating Instructions Manual

Programming
Operating Instructions 581 - 02.0 - 05/2019
Knives and their shape
Part number Knife number Shape
0580 332000
0580 332010
0580 332020
0580 332030
0580 332040
0580 332050
0580 332060
0580 332070
0580 332100
0580 332110
0580 332120
0580 332130
0580 332140

5.9.10 ZZ offset

The sub-item ZZ offset is used to set the compensation for
the zigzag stitch offset.
Parameters in the ZZ offset sub-item
Icon Entry
ZZ offset
31 With eye 2.8 x 4.3 x 36 mm
21 With eye 2.1 x 3.2 x 36 mm
02 Middle cut without eye 8mm
33 Only eye 2.8 x 4.3 mm
23 Only eye 2.1 x 3.2 mm
01 Without eye 36 mm
32 Middle cut with eye 2.8 x 4.3 x 8 mm
22 Middle cut with eye 2.1 x 3.2 x 8 mm
Eyelet  1.0 mm
82
Eyelet  1.5 mm
83
Eyelet  2.0 mm
84
Eyelet  3.0 mm
86
Eyelet  4.0 mm
88
Possible
Meaning
value range
Zigzag stitch 0.8-1.6
offset
Preset value
1.3
103