Threading The Gimp Thread (Subclass 151) - DURKOPP ADLER 581 Operating Instructions Manual

Operation
Operating Instructions 581 - 02.0 - 05/2019
4.7.3

Threading the gimp thread (subclass 151)

Fig. 29: Threading the gimp thread (1)
①
②
③
(1) - Hole
(2) - Thread reel
To thread the gimp thread:
1. Press the Threading mode button.
OR
Switch off the machine.
 The hook rotates into the threading position.
2. Remove the clamping plates.
3. Fit the thread reel (2) on the thread reel holder (3).
4. Insert the gimp thread through the hole (1) in the unwinding
bracket.
(3) - Thread reel holder
45