Programming
Operating Instructions 581 - 02.0 - 05/2019
Step.motor test
NOTICE
Property damage may occur!
Testing the stepper motor can lead to collisions with other
machine elements. There is a risk of breaking.
It is essential that the clamping plates are removed before
performing the stepper motor test.
In the sub-item Step.motor test you can test the stepper
motors.
The stepper motors are tested using the associated reference
switches.
To perform the stepper motor test:
1.
Select Step.motor test.
2.
Press the
3.
With the buttons
motor X ... Z.
4.
Using the
or
or back 20 steps.
X = X-direction (transverse movement of the fabric support plate)
Y = Y-direction (longitudinal movement of the fabric support plate)
Z = Z-direction (rotation of the sewing mechanism)
5.
Quit the stepper motor test using the
button.
or
select the corresponding stepper
buttons, the stepper motor moves forward
button.
117