DURKOPP ADLER 581 Operating Instructions Manual page 12

Requirements
to be met by
the personnel
Operation Check the machine during operating for any externally visible
Safety
equipment
10
All the warnings and safety signs on the machine must always be
in legible condition. Do not remove!
Missing or damaged warnings and safety signs must be replaced
immediately.
Only qualified specialists may:
• Set up the machine/put the machine into operation
• Performing maintenance work and repairs
• Performing work on electrical equipment
Only authorized persons may work on the machine and must first
have understood these instructions.
damage. Stop working if you notice any changes to the machine.
Report any changes to your supervisor. Do not use a damaged
machine any further.
Safety equipment should not be disassembled or deactivated.
If it is essential to disassemble or deactivate safety equipment for
a repair operation, it must be assembled and put back into oper-
ation immediately afterward.
Operating Instructions 581 - 02.0 - 05/2019
Safety