Assembling The Stand; Assembling The Tabletop - DURKOPP ADLER 581 Operating Instructions Manual

Setup
Operating Instructions 581 - 02.0 - 05/2019
Fig. 94: Removing the transport lock of the stand
(3) - Screw
4. Remove the screw (3).
7.3

Assembling the stand

If you ordered the matching stand, use the ring bolt to insert
the machine ( p. 150).
If you would like to use a different stand, you must perform
the following work independently:
• Assemble the main switch ( Additional Instructions
Connecting the control box at the main switch)
• Assembling the tabletop ( p. 149)
• Assembling the compressed air maintenance unit ( p. 159)
7.4

Assembling the tabletop

If you wish to make your own tabletop, use the drawing ( p. 193)
as a template for the dimensions. The tabletop should be
approx 40 mm thick.
③
149