DURKOPP ADLER 581 Operating Instructions Manual page 79

Programming
Operating Instructions 581 - 02.0 - 05/2019
Value Description
Zigzag stitch width in the round tack: The zigzag
stitch width applicable for the entire buttonhole can be
reduced in the round tack.
Seam start position: The seam beginning can be
either in the round tack or within the forward seam.
Overlap in the seam: Overlap of seam beginning and
seam end in the seam.
Seam start position within the seam: The position
of the seam beginning within the forward seam can be
changed from the start of the seam (100 %) to the eye
(0 %).
Overlap in the round tack: Overlap of seam beginning
and seam end in the round tack.
Gimp monitoring (only for additional equipment
581-141 and 581-341): Monitoring on/off, as to
whether the gimp thread is inserted.
Following buttonhole: Number of the buttonhole that
is sewn directly after this buttonhole without opening
the clamps. This makes it possible to carry out double
passes.
Speed: Revolutions per minute.
77