Cleaning The Filter Element - DURKOPP ADLER 581 Operating Instructions Manual

Maintenance
Operating Instructions 581 - 02.0 - 05/2019
To drain the water-oil mixture:
1. Disconnect the machine from the compressed air supply.
2. Place the vessel under the drain screw (3).
3. Loosen the drain screw (3) completely.
4. Allow the water-oil mixture to drain into the vessel.
5. Tighten the drain screw (3).
6. Connect the machine to the compressed air supply.
6.3.3

Cleaning the filter element

NOTICE
Damage to the paintwork from solvent-based cleaners!
Solvent-based cleaners damage the filter.
Use only solvent-free substances for washing out the filter
tray.
Fig. 87: Cleaning the filter element
①
②
(1) - Filter element
(2) - Collection tray
To clean the filter element:
1. Disconnect the machine from the compressed air supply.
2. Drain the water-oil mixture ( p. 138).
③
(3) - Drain screw
139