DURKOPP ADLER 581 Operating Instructions Manual page 81

Programming
Operating Instructions 581 - 02.0 - 05/2019
Fig. 53: Programming sequences (2)
④
(4) - Cutting length
(5) - Zigzag stitch adjustment
6. Use the buttons
the buttonhole within the sequence (1
 The cursor shows the current position.
7. Press the
8. Use the buttons
nd
number (2 column of the display).
 The buttonhole shape is displayed.
9. Press the
10. Use the buttons
buttonholes (3
11. Confirm with the
You can add further buttonhole programs. Start again with step 1.
⑤
(6) - Cutting mode
(7) - Stitch length
or to select the position desired for
button.
or to select the desired buttonhole
button.
or to set the desired number of
rd
column of the display).
button.
⑥
st
column of the display).
⑦
79