Draining The Water-Oil Mixture - DURKOPP ADLER 581 Operating Instructions Manual

138
2. Turn the pressure regulator until the pressure gage (2)
indicates the proper setting:
• Increase pressure = turn clockwise
• Reduce pressure = turn counterclockwise
3. Push the pressure regulator (1) down.
6.3.2

Draining the water-oil mixture

NOTICE
Property damage from excess liquid!
Too much liquid can result in damage to the machine.
Drain liquid as required.
The collection tray (2) of the pressure regulator will show
accumulation of a water-oil mixture.
Proper setting
The water-oil mixture must not rise up to the level of the filter
element (1).
Check the level of the water-oil mixture in the collection tray (2).
Fig. 86: Draining the water-oil mixture
①
②
(1) - Filter element
(2) - Collection tray
(3) - Drain screw
Operating Instructions 581 - 02.0 - 05/2019
Maintenance
③