Maintenance Guidelines; Handling Precautions - Thrane&Thrane SAILOR TT-3000E mini-C GMDSS System Installation Manual

TT-3000E mini-C GMDSS System
6 M
AINTENANCE GUIDELINES
When properly installed the system needs no maintenance.
After approximately 10 years the internal batteries in the TT-
3026C and the TT-3606E has to be replaced, and both the
transceiver and the message terminal must be sent for
service.
6.1 H
ANDLING
•
Do not expose the transceiver's parting line (the blue
styling gasket) & connector to high-pressure water
jets.
•
Exposure of chemical containing alkalis may result in
physical degradation of the transceiver.
•
Do not expose the transceiver to acid curing silicone.
•
Avoid contact with solvents.
Do not paint the transceiver. If it is absolutely necessary to
paint the transceiver, ideally water-based paints or paint
system based on mild solvents should be selected.
P
RECAUTIONS
85/97
Installation Manual