Introduction; Initial Inspection; Storage - Thrane&Thrane SAILOR TT-3000E mini-C GMDSS System Installation Manual

TT-3000E mini-C GMDSS System
1 I
NTRODUCTION
This manual provides instructions for installing a TT-3000E
mini-C GMDSS System.
1.1 I I
NITIAL
Inspect the shipping carton immediately upon receipt for
evidence of damage during the transport. If the shipping
carton is severely damaged or water stained, request the
carrier's agent to be present when opening the carton. Save
the carton packing material for future use.
To avoid hazardous electrical shock, do not perform
electrical tests if there is any sign of shipping damage
to any portion of the outer cover. Read the safety
summary at the front of this manual before installing or
operating the TT-3000E mini-C GMDSS System.
Contents of the shipment should be as listed in the enclosed
packing list. If the contents are incomplete, if there is
mechanical damage or defect, or if the system components do
not work properly, notify your dealer.
After you unpack the system please:
•
Inspect it thoroughly for hidden damaged, loose
components or loose fittings.
•
Inspect the cable harness for stress, loose or broken
wires, or broken cable ties.
•
Examine all the components for loose or missing
hardware.
•
Tighten all loose hardware.
1.2 S
TORAGE
The TT-3000E system components may be stored or shipped
in temperatures within the limits -40° C to +80° C. It is
NSPECTION
WARNING
11/97
Installation Manual