Ap5042 Network Address Configuration; Ap5042 Service Interface; Table 14 Node Id Adressing - Thrane&Thrane SAILOR TT-3000E mini-C GMDSS System Installation Manual

TT-3000E mini-C GMDSS System
Note 2: The power supply is isolated from the box enclosure
as well as from the RS485 interface.
4.7.3.2 AP5042 N
The first AP5042 connected to the TT-3000E mini-C GMDSS
System only needs external power to operate. Subsequent
AP5042's need to get the address pins strapped according to
Table 14.
ID
st
3 (1 AP5042)
nd
2 (2 AP5042)
rd
1 (3 AP5042)
th
0 (4 AP5042)

Table 14 Node ID adressing

4.7.3.3 AP5042 S
Normally there is no need to access the RS232 service
interface, but in case it's necessary, the easiest method is to
make a cable adapter as shown in Figure 47.
A
ETWORK DDRESS
Node ID 1
Floating
Floating
Strap to Node ID 1
GND
Strap to Node ID 1
GND
I
ERVICE NTERFACE
72/97
Installation Manual
C
ONFIGURATION
Node ID 0
Floating
Strap to Node ID 0
GND
Floating
Strap to Node ID 0
GND