VETRON 5000 Instruction Book page 18

INSTRUCTION BOOK
13. SEWING FEET EXCHANGE
CAUTION! RISK OF INJURY!
Push the X-button at the machine head, the red light illuminates showing the active
"BLOCKED MODE", or turn the machine o before you change the sewing feet.
Failure to comply produces a risk of injury in case of an unintentional machine
operation.
During „BLOCKED MODE" the sewing feet have no pressure or position control.
They can be moved by the following method:
01. Press and hold the programmable button on the machine head (lowest button).
02. By turning the JOG KEY the sewing feet can be moved.
03. By loosening screws 1
NOTE!
Push the X-button or switch the machine on again and follow the instructions
displayed on the control panel.
08/2017
18
VETRON 5000/5100 - FLAT BED MACHINE
1
the sewing feet can be exchanged.