VETRON 5000 Instruction Book page 19

INSTRUCTION BOOK
14. THREADING THE MACHINE (ONE/TWO NEEDLE MACHINE)
1 1
CAUTION! RISK OF INJURY!
Push the X-button at the machine head, the red light illuminates showing the
active"BLOCKED MODE", or turn the machine o . Failure to comply produces a risk
of injury in case of an unintentional machine operation.
1
Make sure that the thread takeup lever is in its top dead position.
Now you can thread the machine according to the picture.
NOTE!
Push the X-button or switch the machine on again and follow the instructions
displayed on the control panel.
08/2017
19
VETRON 5000/5100 - FLAT BED MACHINE