Advertisement
https://wiki.teltonika-gps.com/view/How_to_read_data_from_TZ-BT04/05/05B_sensor_with_TMT250_
device
How to read data from TZ-BT04/05/05B
sensor with TMT250 device
Main Page
>
Autonomous Trackers
with TMT250 device
Contents
1 How to read data from TZ-BT04/05/05B sensor with TMT250 device
1.1 Solution applies for these SAS devices
1.2 Configuration
How to read data from TZ-BT04/05/05B sensor with TMT250
device
Solution applies for these SAS devices
|
TMT250
|
GH5200
Configuration
These are instructions on how to easily read data from TZ-BT04/05/05B Bluetooth LE sensor with
TMT250 device.
First the TMT250 device Bluetooth settings need to be configured. These are the required steps:
Press Bluetooth settings.
Turn on
Press Bluetooth 4.0 settings.
Select TZ-BT04/05/05B sensor in
Type your TZ-BT04/05/05B ID in ID field.
After all these steps press Save to device to save configuration.
To start BLE scan right away press Discover BLE.
>
TMT250
>
|
BT Radio
by pressing Enable (hidden) or Enable (visible).
TMT250 FAQ
> How to read data from TZ-BT04/05/05B sensor
BLE connectionless functionalities
section.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Teltonika TMT250
Summary of Contents for Teltonika TMT250
- Page 1 Configuration These are instructions on how to easily read data from TZ-BT04/05/05B Bluetooth LE sensor with TMT250 device. First the TMT250 device Bluetooth settings need to be configured. These are the required steps: Press Bluetooth settings. Turn on BT Radio by pressing Enable (hidden) or Enable (visible).
- Page 2 More information about these settings can be found on TMT250 Bluetooth 4.0 Configuration modes page. To check if the TMT250 device has already received data from TZ-BT04/05/05B Bluetooth LE sensor, follow these steps: Navigate toStatus section. Press I/O Info and look if...
Need help?
Do you have a question about the TMT250 and is the answer not in the manual?
Questions and answers