Table of Contents
Advertisement
8 DEBUG MODE
TMT250 device is able to provide its debug trace when it is connected to PC using the
magnetic USB cable. This trace can be used to detect errors and provide debug information if the
device functions not as expected. Required Terminal application can be downloaded using:
http://avl1.teltonika.lt/Downloads/Software/Terminal.zip
When powered on TMT250 device is connected to PC, two ports are created:
MTK USB Modem Port is used for modem trace;
MTK USB Debug Port is used for Terminal log.
If connected TMT250 device is not recognized by PC, please install the required drivers.
Following link can be used: http://avl1.teltonika.lt/Downloads/FMB1/
After selecting your port click Connect and then click on Start Log button. If the log is not
running, please send .log:1 command (see picture below).
Figure 38 Terminal.exe window
102
Advertisement
Table of Contents
