https://wiki.teltonika-gps.com/view/TMT250_First_Start
TMT250 First Start
Main Page
>
Autonomous Trackers
Contents
1 How to insert micro SIM card and connect the battery
1.1 Correct Battery Connection
1.2 PC Connection (Windows)
1.3 How to install USB drivers (Windows)
1.4 Configuration (Windows)
1.5 Quick SMS configuration
1.6 Precautions
How to insert micro SIM card and connect the battery
1.
Unscrew 4 screws counterclockwise.
2.
Remove the cover.
3.
Insert Micro-SIM card as shown. Make sure that Micro-SIM card cut-off corner is pointing
forward to slot.
Connect the battery as shown to the device.
4.
5.
Attach device cover back and screw in all 4 screws.
6.
Device is ready to be used.
NOTE: In order to prevent device's cover from mechanical damage it is recommended to use
screwdriver, which is included in the package.
Correct Battery Connection
PC Connection (Windows)
1.
Connect device to computer using Magnetic USB cable or Bluetooth connection:
Using Magnetic USB cable
You will need to install USB drivers, see
(Windows)"
Using Bluetooth
TMT250 Bluetooth is enabled by default. Turn on Bluetooth on your PC, then
select Add Bluetooth or other device > Bluetooth. Choose your device named –
>
TMT250
> TMT250 First Start
"How to install USB drivers